What is ECU remapping?

ECU remapping involves modifying the software in your engine control unit to improve performance, fuel efficiency, and drivability.

Is your file service automatic?

Yes, our platform provides 24/7 automatic file processing for most common vehicles and ECUs.

What is Stage 1 tuning?

Stage 1 tuning is a software-only modification designed to safely increase horsepower and torque on a completely stock vehicle.

What is Stage 2 tuning?

Stage 2 requires hardware modifications like an upgraded downpipe or intercooler, providing significantly more power than Stage 1.

Yes, we can securely disable the DPF (Diesel Particulate Filter) system in the ECU software for motorsport or off-road use.

EGR OFF disables the Exhaust Gas Recirculation valve, preventing dirty exhaust gases from re-entering the intake manifold.

Do you support AdBlue / SCR OFF?

Yes, we provide AdBlue/SCR deactivation solutions for a wide range of diesel vehicles.

What is Pop & Bang / Crackle map?

A Pop & Bang map adjusts ignition timing and fueling during deceleration to create popping sounds from the exhaust.

Do you offer switchable Pop & Bang?

Yes, on supported ECUs we can map switchable Pop & Bang linked to the AC button or Sport mode.

Can you disable the speed limiter (Vmax)?

Yes, Vmax OFF removes the electronic top speed limiter from the engine control unit.

IMMO OFF disables the immobilizer function in the ECU, allowing the engine to start without the original paired key.

GPF or OPF OFF disables the Gasoline Particulate Filter logic for vehicles with aftermarket exhausts.

Do you provide NOx OFF?

Yes, NOx sensor deactivation is available for various diesel and petrol engines.

What is Launch Control?

Launch control is a software feature that holds a specific RPM when stationary to optimize acceleration off the line.

What is Hardcut Limiter?

A Hardcut limiter changes the rev limiter behavior from a soft fuel cut to a rapid, aggressive ignition cut.

Can you fix hot start issues?

Yes, hot start fixes adjust the cranking fuel maps so the engine starts instantly when warm (common on VAG TDIs).

Do you support Bosch EDC17?

Absolutely, Bosch EDC17 is one of the most widely supported ECUs on our platform for all solutions.

Do you support Bosch MD1 and MG1?

Yes, we support the latest Bosch MD1 (Diesel) and MG1 (Petrol) control units.

How long does a manual file take?

While most files are automatic (instant), manual requests are usually completed by our engineers within 15-30 minutes.

Yes, all our tuning files are developed in-house, tested on a dyno, and keep all OEM safety limiters active.

Do you provide checksum correction?

Yes, our automatic system calculates and corrects the checksums for most ECUs before downloading.

What tools are compatible with your files?

Our files are compatible with all major master tools, including Autotuner, Flex, KESS3, bFlash, and CMD.

Do you offer DSG / TCU tuning?

Yes, we provide gearbox tuning for DSG, ZF, and other modern automatic transmissions.

DSG Farts are ignition cut sounds generated during upshifts on VAG models, which can be enhanced via tuning.

Can you do CVN Patch?

Yes, a CVN (Calibration Verification Number) patch ensures the modified file matches the original CVN to pass dealer diagnostic checks.

Do you support Siemens/Continental ECUs?

Yes, we support a wide range of Siemens and Continental ECUs including SID, SIMOS, PCR, and MSD series.

What is Start & Stop OFF?

This solution permanently disables the automatic engine start/stop system for a smoother driving experience.

Do you support Readiness fix?

Yes, readiness monitors can be set to 'Passed' to prevent diagnostic trouble codes after removing components like DPF or Cat.

Can I use your platform 24/7?

Yes, our automatic file service is available 24 hours a day, 7 days a week, 365 days a year.

How do I become a partner?

Simply register on our platform, purchase credits, and start uploading your original ECU files immediately.

Case ih Tuning Dateien

3216B

AF

2377 8.3 CR

Bosch EDC7UC31 | 330 hp BHP

Bosch EDC17CV41 | 580 hp BHP

8010 10.3

Bosch EDC7UC31 | 500 hp BHP

8240 - 12.9 - 571hp - Tier4

9240 - 15.9 - 634hp - Tier4

Bosch EDC17CV41 | 740 hp BHP

CPX

CVX

Bosch EDC7UC31 | 245 hp BHP

Dorado

Dorado F-S 75

Bosch MD1CE101 | 90 hp BHP

FARMALL

105A - 3.4 - 106hp - Tier 4A

Bosch MD1SC069 | 136 hp BHP

105C - 3.4 - 106hp - Tier 4A

| 136 hp BHP

105U - 3.4 Tier 4A

| 135 hp BHP

115A - 3.4 - 113hp - Tier 4A

| 145 hp BHP

115C Tier 4A

Bosch EDC17C49 | 145 hp BHP

Bosch EDC17C49 | 95 hp BHP

85 C 3.4 Tier 4A

Bosch MD1CS069 | 105 hp BHP

85A - 3.4 - 86hp - Tier 4A

| 115 hp BHP

95A - 3.4 - 99hp - Tier 4A

| 130 hp BHP

95C 3.4 Tier 4A

Bosch EDC17C49 | 125 hp BHP

Bosch EDC17C49 | 94 hp BHP

C75 3.2

Bosch MD1CS069 | 105 hp BHP

Farmlift

525 - 3.3 - 74hp - Tier3

| 104 hp BHP

632 - 4.5 - 110hp - Tier3

| 135 hp BHP

635 - 4.5 - 129hp - Tier3

| 160 hp BHP

735 - 4.5 - 110hp - Tier3

| 135 hp BHP

742 - 4.5 - 129hp - Tier3

| 160 hp BHP

935 - 4.5 - 110hp - Tier3

| 135 hp BHP

Luxxum

100 - 3.4 - 114hp - Tier 4A

| 140 hp BHP

110 - 3.4 - 107hp - Tier 4A

| 135 hp BHP

120 - 3.4 - 99hp - Tier 4A

| 130 hp BHP

MX

150 6.7 FPT Tier 4B

| 180 hp BHP

255 - 8.3

Bosch EDC17CV41 | 310 hp BHP

MXM

MXU

Magnum

Bosch EDC17CV41 | 255 hp BHP

235 - 8.7 - 235hp - Tier 4A

250 - 8.7 - CVX - 250hp - Tier 4B

Bosch EDC17CV41 | 320 hp BHP

280 - 8.7 - CVX - 280hp - Tier 4B

Bosch EDC7UC31 | 356 hp BHP

310 - 8.7 - CVX - 311hp - Tier 4B

| 380 hp BHP

315 8.7 Tier 4A

| 390 hp BHP

340 - 8.7 - CVX - 340hp - Tier 4B

| 410 hp BHP

340 8.7 Tier 4A

| 430 hp BHP

380 - 8.7 - CVX - 379hp - Tier 4B

| 450 hp BHP

Maxxum

110 - 4.5

Bosch EDC16C39 | 142 hp BHP

110 - 4.5 - Tier 4A

| 140 hp BHP

115 - 6.7

Bosch EDC16C39 | 145 hp BHP

115 - 6.7 - Tier 4A

Bosch EDC17CV41 | 150 hp BHP

120 - 4.5

Bosch EDC17CV41 | 158 hp BHP

Bosch EDC7UC31 | 185 hp BHP

140 - 6.7 Tier - 4A

| 172 hp BHP

150 - 6.7 FPT - 150hp - Tier 4B

| 180 hp BHP

270 - 8.3

| 340 hp BHP

Optum

270 - 6.7 - CVX - 271hp - Tier 4B

Bosch MD1CE101 | 320 hp BHP

300 - 6.7 - CVX - 300hp - Tier 4B

Bosch MD1CE101 | 350 hp BHP

Patriot

3240 - 6.7 FPT - Tier 4B

3340 - 6.7 FPT Tier 4B

Puma

125 - 6.7 127

| 160 hp BHP

130 - 6.7 Tier 4A

Bosch EDC7UC31 | 166 hp BHP

Bosch MD1CE101 | 180 hp BHP

155 6.7

| 192 hp BHP

160 - 6.7 Tier 4A

Bosch EDC7UC31 | 203 hp BHP

165 - 6.7

Bosch EDC16C39 | 200 hp BHP

165 - 6.7 - 165hp - Tier 4B

Bosch EDC17CV41 / Bosch MD1CE101 | 215 hp BHP

170 - 6.7 Tier 4A

| 210 hp BHP

180 - 6.7

Bosch EDC16C39 | 215 hp BHP

185 - 6.7 - Tier 4A

Bosch EDC17CV41 | 230 hp BHP

Bosch MD1CE101 | 240 hp BHP

210 - 6.7

| 245 hp BHP

215 - 6.7 Tier 4A

Bosch EDC7UC31 | 270 hp BHP

220 - 6.7 FPT Tier 4B

Bosch EDC17CV41 | 292 hp BHP

Quantum

105F - 4.5 - 106hp - Tier 3B

| 125 hp BHP

105N - 4.5 - 106hp - Tier 3B

| 125 hp BHP

105V - 4.5 - 106hp - Tier 3B

| 125 hp BHP

65V - 3.2 - 65hp - Tier 3B

| 95 hp BHP

75F - 3.2 - 78hp - Tier 3B

| 108 hp BHP

75N - 3.2 - 78hp - Tier 3B

| 108 hp BHP

75V - 3.2 - 78hp - Tier 3B

| 108 hp BHP

85F - 3.2 - 88hp - Tier 3B

| 118 hp BHP

85V - 3.2 - 88hp - Tier 3B

| 118 hp BHP

95F - 4.5 - 97hp - Tier 3B

| 127 hp BHP

95N - 4.5 - 97hp - Tier 3B

| 127 hp BHP

95V - 4.5 - 97hp - Tier 3B

| 127 hp BHP

STX

Steiger

450 12.9 Quadtrac Tier 4A

| 530 hp BHP

485 - 12.9

| 575 hp BHP

500 - 12.9 - Quadtrac Tier 4A

| 575 hp BHP

500 - 12.9 Tier 4A

| 575 hp BHP

540 - 12.9 - Quadtrac - 543hp - Tier 4B

| 680 hp BHP

580 - 12.9 - Quadtrac - 589hp - Tier 4B

Bosch EDC17CV41 | 740 hp BHP

620 - 12.9 - Quadtrac - 628hp - Tier 4B

| 788 hp BHP

Case ih Tuning Dateien

3216B

AF

CPX

CVX

Dorado

FARMALL

Farmlift

Luxxum

MX

MXM

MXU

Magnum

Maxxum

Optum

Patriot

Puma

Quantum

STX

Steiger

Title