What is ECU remapping?

ECU remapping involves modifying the software in your engine control unit to improve performance, fuel efficiency, and drivability.

Is your file service automatic?

Yes, our platform provides 24/7 automatic file processing for most common vehicles and ECUs.

What is Stage 1 tuning?

Stage 1 tuning is a software-only modification designed to safely increase horsepower and torque on a completely stock vehicle.

What is Stage 2 tuning?

Stage 2 requires hardware modifications like an upgraded downpipe or intercooler, providing significantly more power than Stage 1.

Yes, we can securely disable the DPF (Diesel Particulate Filter) system in the ECU software for motorsport or off-road use.

EGR OFF disables the Exhaust Gas Recirculation valve, preventing dirty exhaust gases from re-entering the intake manifold.

Do you support AdBlue / SCR OFF?

Yes, we provide AdBlue/SCR deactivation solutions for a wide range of diesel vehicles.

What is Pop & Bang / Crackle map?

A Pop & Bang map adjusts ignition timing and fueling during deceleration to create popping sounds from the exhaust.

Do you offer switchable Pop & Bang?

Yes, on supported ECUs we can map switchable Pop & Bang linked to the AC button or Sport mode.

Can you disable the speed limiter (Vmax)?

Yes, Vmax OFF removes the electronic top speed limiter from the engine control unit.

IMMO OFF disables the immobilizer function in the ECU, allowing the engine to start without the original paired key.

GPF or OPF OFF disables the Gasoline Particulate Filter logic for vehicles with aftermarket exhausts.

Do you provide NOx OFF?

Yes, NOx sensor deactivation is available for various diesel and petrol engines.

What is Launch Control?

Launch control is a software feature that holds a specific RPM when stationary to optimize acceleration off the line.

What is Hardcut Limiter?

A Hardcut limiter changes the rev limiter behavior from a soft fuel cut to a rapid, aggressive ignition cut.

Can you fix hot start issues?

Yes, hot start fixes adjust the cranking fuel maps so the engine starts instantly when warm (common on VAG TDIs).

Do you support Bosch EDC17?

Absolutely, Bosch EDC17 is one of the most widely supported ECUs on our platform for all solutions.

Do you support Bosch MD1 and MG1?

Yes, we support the latest Bosch MD1 (Diesel) and MG1 (Petrol) control units.

How long does a manual file take?

While most files are automatic (instant), manual requests are usually completed by our engineers within 15-30 minutes.

Yes, all our tuning files are developed in-house, tested on a dyno, and keep all OEM safety limiters active.

Do you provide checksum correction?

Yes, our automatic system calculates and corrects the checksums for most ECUs before downloading.

What tools are compatible with your files?

Our files are compatible with all major master tools, including Autotuner, Flex, KESS3, bFlash, and CMD.

Do you offer DSG / TCU tuning?

Yes, we provide gearbox tuning for DSG, ZF, and other modern automatic transmissions.

DSG Farts are ignition cut sounds generated during upshifts on VAG models, which can be enhanced via tuning.

Can you do CVN Patch?

Yes, a CVN (Calibration Verification Number) patch ensures the modified file matches the original CVN to pass dealer diagnostic checks.

Do you support Siemens/Continental ECUs?

Yes, we support a wide range of Siemens and Continental ECUs including SID, SIMOS, PCR, and MSD series.

What is Start & Stop OFF?

This solution permanently disables the automatic engine start/stop system for a smoother driving experience.

Do you support Readiness fix?

Yes, readiness monitors can be set to 'Passed' to prevent diagnostic trouble codes after removing components like DPF or Cat.

Can I use your platform 24/7?

Yes, our automatic file service is available 24 hours a day, 7 days a week, 365 days a year.

How do I become a partner?

Simply register on our platform, purchase credits, and start uploading your original ECU files immediately.

Massey Ferguson Tuning Dateien

3000serie

4000serie

4707 - 3.3 - 75hp

| 100 hp BHP

4708 - 3.3 - 85hp

Bosch EDC17CV54 | 105 hp BHP

4709 - 3.3 - 95hp

| 115 hp BHP

5000serie

Bosch EDC17CV41 | 150 hp BHP

Bosch EDC17CV41 | 170 hp BHP

Bosch EDC17CV54 | 133 hp BHP

5611 - 4.4 - 110hp

| 135 hp BHP

5612 - 4.4 120hp

Bosch EDC17CV54 | 150 hp BHP

5613 - 4.4 - 130hp

| 160 hp BHP

5710 SL - 4.4 - 100hp

Bosch EDC17CV41 | 125 hp BHP

5711 SL - 4.4 - 110hp

Bosch EDC17CV41 | 140 hp BHP

5712 SL - 4.4 - 120hp

Bosch EDC17CV41 | 150 hp BHP

5713 SL - 4.4 - 130hp

Bosch EDC17CV41 | 160 hp BHP

6000serie

6485 - CR - SISU - 160hp

| 200 hp BHP

6490 - 170hp

| 210 hp BHP

6490 - CR - SISU - 170hp

| 215 hp BHP

6495 - 185hp

| 220 hp BHP

6495 - CR - SISU - 185hp

| 220 hp BHP

6497 - CR - SISU - 200hp

| 245 hp BHP

6499 - 215hp

Bosch EDC17C87 | 248 hp BHP

6499 - CR - SISU - 215hp

Bosch EDC17CV41 | 160 hp BHP

7000serie

7485 - CR - SISU - 165hp

| 195 hp BHP

7490 - 180hp

| 220 hp BHP

7490 - CR - SISU - 175hp

| 215 hp BHP

7495 - 194hp

| 235 hp BHP

7495 - CR - SISU - 190hp

| 250 hp BHP

7499 - CR - SISU - 242hp

Bosch EDC17CV54 | 190 hp BHP

7618 - SCR - 175hp

Bosch EDC17CV54 | 200 hp BHP

7619 - SCR - 185hp

| 210 hp BHP

7620 - SCR - 200hp

Bosch EDC17CV54 | 240 hp BHP

7622 - SCR - 215hp

Bosch EDC17CV41 | 255 hp BHP

7624 - SCR - 215hp

Bosch EDC17CV54 | 255 hp BHP

7626 - SCR - 255hp

Bosch EDC17CV54 | 290 hp BHP

7714 - 6.6 - SCR - 165hp

| 190 hp BHP

7715 - 6.6 - SCR - 175hp

Bosch EDC17CV41 | 205 hp BHP

7716 - 6.6 - SCR - 185hp

| 210 hp BHP

7718 - 6.6 - SCR - 200hp

Bosch EDC17CV41 | 240 hp BHP

7719 - 6.6 - SCR - 210hp

| 250 hp BHP

7720 - 6.6 - SCR - 225hp

Bosch EDC17CV41 | 260 hp BHP

7720 - 7.4 - SCR - 240hp

Bosch EDC17CV44 | 280 hp BHP

8000serie

8650 - CR - AdBlue - 270hp

| 310 hp BHP

8660 - CR - AdBlue - 295hp

Bosch EDC7UC31 | 330 hp BHP

8670 - CR - AdBlue - 320hp

| 360 hp BHP

8680 - CR - AdBlue - 350hp

| 386 hp BHP

8690 - CR - AdBlue - 370hp

Bosch EDC17CV41 | 340 hp BHP

Bosch EDC17CV54 | 410 hp BHP

9000serie

9695 - 8.4 - CR -305hp

| 360 hp BHP

9795 - 8.4 - CR -357hp

| 410 hp BHP

Activa

7247S - 7.4 - SISU - 277hp

Beta

7260 - 7.4 - SISU - 277hp

| 350 hp BHP

7270 - 8.4 - SISU - 337hp

Centora

7280 - 8.4 - SISU - 349hp

| 410 hp BHP

7282 - 8.4 - SISU - 386hp

Delta

9380 - 496hp

| 526 hp BHP

Massey Ferguson Tuning Dateien

3000serie

4000serie

5000serie

6000serie

7000serie

8000serie

9000serie

Activa

Beta

Centora

Delta

Title