What is ECU remapping?

ECU remapping involves modifying the software in your engine control unit to improve performance, fuel efficiency, and drivability.

Is your file service automatic?

Yes, our platform provides 24/7 automatic file processing for most common vehicles and ECUs.

What is Stage 1 tuning?

Stage 1 tuning is a software-only modification designed to safely increase horsepower and torque on a completely stock vehicle.

What is Stage 2 tuning?

Stage 2 requires hardware modifications like an upgraded downpipe or intercooler, providing significantly more power than Stage 1.

Yes, we can securely disable the DPF (Diesel Particulate Filter) system in the ECU software for motorsport or off-road use.

EGR OFF disables the Exhaust Gas Recirculation valve, preventing dirty exhaust gases from re-entering the intake manifold.

Do you support AdBlue / SCR OFF?

Yes, we provide AdBlue/SCR deactivation solutions for a wide range of diesel vehicles.

What is Pop & Bang / Crackle map?

A Pop & Bang map adjusts ignition timing and fueling during deceleration to create popping sounds from the exhaust.

Do you offer switchable Pop & Bang?

Yes, on supported ECUs we can map switchable Pop & Bang linked to the AC button or Sport mode.

Can you disable the speed limiter (Vmax)?

Yes, Vmax OFF removes the electronic top speed limiter from the engine control unit.

IMMO OFF disables the immobilizer function in the ECU, allowing the engine to start without the original paired key.

GPF or OPF OFF disables the Gasoline Particulate Filter logic for vehicles with aftermarket exhausts.

Do you provide NOx OFF?

Yes, NOx sensor deactivation is available for various diesel and petrol engines.

What is Launch Control?

Launch control is a software feature that holds a specific RPM when stationary to optimize acceleration off the line.

What is Hardcut Limiter?

A Hardcut limiter changes the rev limiter behavior from a soft fuel cut to a rapid, aggressive ignition cut.

Can you fix hot start issues?

Yes, hot start fixes adjust the cranking fuel maps so the engine starts instantly when warm (common on VAG TDIs).

Do you support Bosch EDC17?

Absolutely, Bosch EDC17 is one of the most widely supported ECUs on our platform for all solutions.

Do you support Bosch MD1 and MG1?

Yes, we support the latest Bosch MD1 (Diesel) and MG1 (Petrol) control units.

How long does a manual file take?

While most files are automatic (instant), manual requests are usually completed by our engineers within 15-30 minutes.

Yes, all our tuning files are developed in-house, tested on a dyno, and keep all OEM safety limiters active.

Do you provide checksum correction?

Yes, our automatic system calculates and corrects the checksums for most ECUs before downloading.

What tools are compatible with your files?

Our files are compatible with all major master tools, including Autotuner, Flex, KESS3, bFlash, and CMD.

Do you offer DSG / TCU tuning?

Yes, we provide gearbox tuning for DSG, ZF, and other modern automatic transmissions.

DSG Farts are ignition cut sounds generated during upshifts on VAG models, which can be enhanced via tuning.

Can you do CVN Patch?

Yes, a CVN (Calibration Verification Number) patch ensures the modified file matches the original CVN to pass dealer diagnostic checks.

Do you support Siemens/Continental ECUs?

Yes, we support a wide range of Siemens and Continental ECUs including SID, SIMOS, PCR, and MSD series.

What is Start & Stop OFF?

This solution permanently disables the automatic engine start/stop system for a smoother driving experience.

Do you support Readiness fix?

Yes, readiness monitors can be set to 'Passed' to prevent diagnostic trouble codes after removing components like DPF or Cat.

Can I use your platform 24/7?

Yes, our automatic file service is available 24 hours a day, 7 days a week, 365 days a year.

How do I become a partner?

Simply register on our platform, purchase credits, and start uploading your original ECU files immediately.

New Holland File di Rimappatura

CR

10.90 - 15.9 - 653hp

| 683 hp BHP

7.90 - 8.7 - 449hp

Bosch EDC17CV41 | 479 hp BHP

8.80 - 10.3 - 490hp

Bosch EDC17CV41 | 520 hp BHP

8.90 - 11.1 - 517hp

Bosch EDC7UC31 | 547 hp BHP

9.80 - 12.9 - 571hp

Bosch MD1CE101 | 601 hp BHP

9.90 - 12.9 - 571hp

Bosch EDC17CV41 / Bosch EDC7UC31 | 601 hp BHP

FR

LM

6.35 Elite - 4.5 - 143hp

| 173 hp BHP

7.35 - 4.5 - 121hp

| 151 hp BHP

7.42 Elite - 4.5 - 143hp

| 173 hp BHP

9.35 - 4.5 - 121hp

| 151 hp BHP

T4

Bosch MD1SC069 | 95 hp BHP

T4.75 75hp

Bosch MD1CS069 | 102 hp BHP

T4.85 84hp

Bosch EDC17C49 | 105 hp BHP

T4000serie

T4020.DeluxeSuperSteer 65hp

| 95 hp BHP

T4030.DeLuxeSuperSteer 78hp

| 108 hp BHP

T4040.DeLuxeSuperSteer 86hp

| 116 hp BHP

T4050.DeLuxeSuperSteer 97hp

| 127 hp BHP

T4F

T4N

Bosch EDC17C49 | 127 hp BHP

T4Powerstar

T4V

T5

T5.100 - 3.4 - 99hp

Bosch MD1SC069 | 128 hp BHP

T5.105 106hp

Bosch EDC17C49 | 132 hp BHP

T5.105-ElectroCommand 106hp

Bosch MD1SC069 | 132 hp BHP

T5.110 - 3.4 - 107hp

Bosch EDC17CV41 | 130 hp BHP

T5.115 114hp

| 135 hp BHP

T5.115-ElectroComand 114hp

Bosch MD1CE101 | 135 hp BHP

T5.120 - 3.4 - 117hp

Bosch EDC17C49 | 135 hp BHP

T6

T6.120 110hp

| 135 hp BHP

T6.125 - 4.4 - 116hp

Bosch MD1CE101 | 146 hp BHP

T6.140 110hp

Bosch EDC7UC31 | 140 hp BHP

T6.145 - 4.4 - 116hp

Bosch MD1CE101 | 146 hp BHP

Bosch EDC17CV41 | 150 hp BHP

T6.160 130hp

| 163 hp BHP

T6.165 - 4.4 - 135hp

Bosch EDC17CV41 | 165 hp BHP

T6.165 125hp

Bosch EDC17CV41 | 155 hp BHP

T6.175 - 4.4 - 145hp

| 175 hp BHP

T6.175 140hp

Bosch EDC7UC31 / Bosch EDC17CV41 | 175 hp BHP

T6.180 - 4.4 - 145hp

Bosch MD1CE101 | 175 hp BHP

T6000serie

Bosch EDC16C39 | 145 hp BHP

Bosch EDC16C39 | 175 hp BHP

T6080 RC-TP 157hp

| 200 hp BHP

T7

T7.170 125hp

Bosch EDC17CV41 / Bosch EDC7UC31 | 155 hp BHP

T7.185 140hp

Bosch EDC7UC31 | 180 hp BHP

T7.190 190hp

Bosch MD1CE101 / Bosch EDC17CV41 | 220 hp BHP

T7.200 155hp

Bosch EDC7UC31 | 195 hp BHP

T7.210 164hp

Bosch MD1CE101 | 205 hp BHP

T7.220 161hp

Bosch EDC7UC31 | 200 hp BHP

T7.235 185hp

Bosch MD1CE101 | 225 hp BHP

T7.250 200hp

Bosch MD1CE101 / Bosch EDC7UC31 | 250 hp BHP

T7.260 214hp

| 265 hp BHP

T7.270 228hp

Bosch MD1CE101 / Bosch EDC7UC31 | 290 hp BHP

T7.290 288hp

Bosch EDC17CV41 / Bosch MD1CE101 | 340 hp BHP

T7.315 313hp

Bosch MD1CE101 | 350 hp BHP

T7000serie

T8

Bosch EDC17CV41 | 320 hp BHP

Bosch EDC7UC31 | 400 hp BHP

T8000serie

T9

Bosch EDC7UC31 | 455 hp BHP

T9.480 - 12.9 - 426hp

| 456 hp BHP

T9.505 457hp

| 500 hp BHP

T9.530 - 12.9 - 476hp

| 506 hp BHP

T9.560 507hp

| 550 hp BHP

T9.565 - 12.9 - 507hp

| 537 hp BHP

T9.600 - 12.9 - 542hp

| 572 hp BHP

T9.615 542hp

| 590 hp BHP

T9.645 - 12.9 - 589hp

| 619 hp BHP

T9.670 608hp

| 650 hp BHP

T9.700 - 12.9 - 628hp

| 658 hp BHP

TC

TD4000F

TD5

TJ

375-14.9.Cummins 383hp

| 475 hp BHP

TM

175 177hp

| 225 hp BHP

190 193hp

Bosch MS6.4 | 240 hp BHP

TS

110A 116hp

Bosch EDC7C1 | 145 hp BHP

TVT

New Holland File di Rimappatura

CR

FR

LM

T4

T4000serie

T4F

T4N

T4Powerstar

T4V

T5

T6

T6000serie

T7

T7000serie

T8

T8000serie

T9

TC

TD4000F

TD5

TJ

TM

TS

TVT

Title